| Gerber SOLARA™ UV2 |
 |
Printing full bleed on rigid material
Jobs that are wider and longer than the material stock can be sent to the SOLARA UV2 using this simple step-by-step procedure. More... | |
|
| |
| Gerber SOLARA™ UV2 |
|
Trial Printing on an Unqualified Material
There are some materials that Gerber/ONYX have not yet qualified for use with the SOLARA UV2. Follow these steps for unqualified materials. More... | |
|
| |
| Gerber SOLARA™ UV2 |
|
Printing on an Clear Material
Use this procedure when printing on clear materials or materials that are hard to scan. More... | |
|
| |
| Gerber SOLARA™ UV2 |
|
Printing ½ inch MDO (aka Crezon)
Surface quality and overall flatness of MDO can vary greatly. Here are some pointers and observations to help you overcome potential problem areas. More... | |
|
| |
| Gerber SOLARA™ UV2 |
|
Printing to the end of a sheet of media
The SOLARA UV2 will automatically stop printing before the material runs out to protect the platen. Use this procedure to print to the end of a sheet or roll of media. More... | |
|
| |
| Gerber SOLARA™ UV2 |
|
Spot Color Replacement in ImageRIP
Follow this procedure to replace spot colors using the Preflight function in ImageRIP. More... | |
|
| |
| Gerber SOLARA™ UV2 |
|
Controllable Variables in UV Printing
The SOLARA UV2 uses two 500 watt lamps to cure UV ink. Materials can sometimes react (expand or bow) under these lamps. However certain variables can be controlled to lessen this thermal impact. More... | |
|
| |
| Gerber SOLARA™ UV2 |
|
Overcoming “Job Won’t Fit” Error
Use this simple procedure to correct the material size or image size in your Gerber/ONYX RIP. More... | |
|
| |
| Gerber SOLARA™ UV2 |
|
Printing Panel Jobs on Rigid Media
Running a panel job on roll material is very straight-forward, because, theoretically, there’s never an end to the roll. However working with a dedicated sheet size can require a bit more forethought. More... | |
|
| |
| Gerber SOLARA™ UV2 |
|
Printing Gerber Spot Colors from Onyx®
Export spot color jobs out of OMEGA™ 2.6 or 3.0 for use in ImageRIP Plus™ by Onyx, or Onyx Postershop® and ProductionHouse™ More... | |
|
| |
