Inkjet Solutions
  Solara ionv
  Solara ionx
  Solara ionz
Thermal Transfer
  EDGE FX
Routing & Cutting
  M Series
  Sabre
  Dimension 200
Router Bits
  GerberCUT
Vinyl Cutting
  P2C
  enVision
  GS Plus
Software
  OMEGA
  Gerber RIPs
  ARTPath
Routing & Cutting
Home  »  Products  »  Routing & Cutting  »  Routing Bits  » 
Gerber Gold™ Routing Bits (New)
While they don't look Gold, these titanium nitride coated bits certainly deserve Gold status. These new competitively priced bits cut cleaner, faster, quieter and last longer. These high performance bits can be used with all Gerber routers and engravers, as well as with other routers, both automated and manual.

Made from high-quality sub-micrograin carbide, these bits are fashioned using a unique geometry. This reduces the need to change tools when routing a variety of materials requiring the same tool diameter.

  

Bits available in this series:
 

General Purpose - Gerber Platinum
Application Code = GP
Gerber takes the guesswork out of choosing the correct bit. The application code is etched into the shank of the bit, along with the part number for easy identification.

Materials:
Gerber Platinum series is a high performance tool for use with Hard and Soft Plastic, Hard and Soft Woods, Wood and Plastic Composites.

 
General Purpose - Gerber Platinum Bits 

GP Part No.
(English)		 Shank Diameter Cutting Diameter Cutting Edge Length
P80356A 1/8" 1/16" 1/4"
P79825A 1/4" 1/8" 1/2"
P80300A 1/4" 1/8" 1 1/8"
P79826A 1/4" 3/16" 5/8"
P79827A 1/4" 3/16" 1 1/4"
P79828A 1/4" 1/4" 5/8"
P79829A 1/4" 1/4" 7/8"
P79830A 1/4" 1/4" 1 1/2"
P80301A 3/8" 3/8" 1 1/8"
 
   
Back to Top

All Purpose Straight
Application Code = APS
Gerber takes the guesswork out of choosing the correct bit. The application code is etched into the shank of the bit, along with the part number for easy identification.

Materials:
Substrates with thin laminates, Foam boards, clay coated paper & styrene surfaces (Fome-Cor®, Gatorfoam®, Gatorplast®)

 
All Perpose Straight Bits 

APS Part No.
(English)		 Shank Diameter Cutting Diameter Cutting Edge Length
P80336A 1/4" 1/8" 1/2"
P80337A 1/4" 3/16" 5/8"
P80338A 1/4" 1/4" 3/4"
P80339A 1/4" 1/4" 1 1/4"
 
   
Back to Top

All Purpose Cleanout
Application Code = APC
Gerber takes the guesswork out of choosing the correct bit. The application code is etched into the shank of the bit, along with the part number for easy identification.

Materials:
Produces a clean bottom finish with a .002" radius inside bottom edge.
HDPE (Polycarve™), Aluminum, Woods, Solid Surface

 
All Purpose Cleanout Bits 

APC Part No.
(English)		 Shank Diameter Cutting Diameter Cutting Edge Length
P80358A 1/8" 1/8" 1/4"
P80359A 1/4" 1/4" 3/8"
P80360A 3/8" 3/8" 5/8"
 
   
Back to Top

Aluminum & Wood
Application Code = AW
Gerber takes the guesswork out of choosing the correct bit. The application code is etched into the shank of the bit, along with the part number for easy identification.

Materials:
Alucobond®, Dibond®, Dilite®, Hardwood, Softwood, Non-Ferrous Metals
(Aluminum, Brass, Copper)

 
Aluminum and Wood Bits 

AW Part No.
(English)		 Shank Diameter Cutting Diameter Cutting Edge Length
P79820A 1/8" 1/16" 1/4"
P79821A 1/8" 1/8" 1/4"
P79822A 1/4" 3/16" 3/8"
P79823A 1/4" 1/4" 3/8"
P79824A 1/4" 1/4" 3/4"
P80307A 3/8" 3/8" 3/4"
 
   
Back to Top

Laminates & Veneers
Application Code = LV
Gerber takes the guesswork out of choosing the correct bit. The application code is etched into the shank of the bit, along with the part number for easy identification.

Materials:
Produces clean top & bottom edges on single & double-sided laminated substrates. Hardwood, Softwood, Wood Composites (MDO, MDF, Plywood, Particle board)

 
Laminate and Veneer Bits 

LV Part No.
(English)		 Shank Diameter Cutting Diameter Cutting Edge Length
P80302A 1/4" 1/8" 3/8"
P80303A 1/4" 3/16" 5/8"
P80304A 1/4" 1/4" 7/8"
P80305A 3/8" 3/8" 7/8"
P80306A 3/8" 3/8" 1 1/8"
 
   
Back to Top

Hard Plastic & Foam
Application Code = HPF
Gerber takes the guesswork out of choosing the correct bit. The application code is etched into the shank of the bit, along with the part number for easy identification.

Materials:
Solid Surface (Avonite™, Corian®), Cast Acrylic

 
Hard Plastic and Foam Bits 

HPF Part No.
(English)		 Shank Diameter Cutting Diameter Cutting Edge Length
P80340A 1/4" 1/16" 1/4"
P80347A 1/4" 3/16" 1 1/8"
P80344A 1/4" 1/8" 1/4"
P80341A 1/4" 1/8" 1/2"
P80348A 1/4" 1/8" 1 1/8"
P80345A 1/4" 3/16" 3/8"
P80342A 1/4" 3/16" 5/8"
P80343A 1/4" 1/4" 3/4"
P80346A 1/4" 1/4" 1/2"
P80370A 1/4" 1/4" 1 1/2"
 
   
Back to Top

Soft Plastic & Foam
Application Code = SPF
Gerber takes the guesswork out of choosing the correct bit. The application code is etched into the shank of the bit, along with the part number for easy identification.

Materials:
PVC Foam (Celtec®, Trovicel®, Sintra®, Kometex®), HDU (Signfoam®, Precision Board™), Extruded Acrylic, Styrene, Polycarbonate (Lexan®), HDPE (Polycarve™)

 
Soft Plastic and Foam Bits 

SPF Part No.
(English)		 Shank Diameter Cutting Diameter Cutting Edge Length
P80367A 1/4" 1/16" 1/4"
P80363A 1/4" 1/8" 1/4"
P80366A 1/4" 1/8" 1/2"
P80362A 1/4" 3/16" 3/8"
P80365A 1/4" 3/16" 5/8"
P80364A 1/4" 1/4" 3/4"
P80368A 1/4" 1/4" 1 1/2"
 
   
Back to Top

Foams (Special Long)
Application Code = F
Gerber takes the guesswork out of choosing the correct bit. The application code is etched into the shank of the bit, along with the part number for easy identification.

Materials:
Specially designed for thick foams and soft plastics from 1-1/4" to 2-1/4".
HDU (Precision Board™, Signfoam®)

 
Foam Bits

F Part No.
(English)		 Shank Diameter Cutting Diameter Cutting Edge Length
P80349A 1/4" 1/4" 1 1/4"
P80350A 1/4" 1/4" 2 1/4"
P80351A 3/8" 3/8" 1 1/2"
 
   
Back to Top

3D Modeling
Application Code = 3DM
Gerber takes the guesswork out of choosing the correct bit. The application code is etched into the shank of the bit, along with the part number for easy identification.

Materials:
Ball Nose bit designed for three-dimensional modeling. Advanced grind technology produces a superior cut in plastics, woods composites and aluminum.

 
3D Modeling Bits 

3DM Part No.
(English)		 Shank Diameter Cutting Diameter Cutting Edge Length
P80352A 1/8" 1/8" 1/2"
P80353A 1/4" 3/16" 3/4"
P80354A 1/4" 1/4" 7/8"
P80355A 3/8" 3/8" 1 1/8"
 
   
Back to Top

Folding Tool
Application Code = FT
Gerber takes the guesswork out of choosing the correct bit. The application code is etched into the shank of the bit, along with the part number for easy identification.

Materials:
Carbide tipped specialty bit designed for folding Alucobond®, Dibond®, Dilite®
up to 90-degrees.

 
Folding Tool 

FT Part No.
(English)		 Shank Diameter Cutting Diameter Cutting Edge Length
P80361A 1/4" 1/2" 3/8"
 
   
Back to Top
GERBER is the first choice of graphics professionals, providing color printing, vinyl cutting,
and dimensional sign making solutions for indoor and outdoor-durable signage needs.
Home   |   Products   |   Supplies   |   Support   |   News & Extras   |   Distributors   |  About   |  Contact Us
Search   |   Site Map   |   GERBERnet © 2010 Gerber Scientific, Inc. All rights reserved.