Up sell Magnet to your existing customers and make more $$$!

• Increase Sales!
  Sell to someone who is already buying.
  Create a magnet version of their job.

• Show Your Customers!
  Create a supply of printed magnet samples to show your customers.

• Sell Yourself!
  Give away a magnet promo item highlighting your business to every customer.

• Make a Profit!
  Gerber is making that easy...

Application Techniques

PRINTING
The magnetic nature of this material may cause super-fine metal particles to attract to its surface. For optimal print results, Gerber magnetic films should be cleaned with distilled water on a lint-free cloth. Be certain that the material is completely dry before printing or cutting begins.
 
SUBSTRATE PREPARATION – VEHICLE APPLICATIONS
When using Gerber AutoMag for vehicle applications, both the vehicle and the brown magnetic side of the sign should be clean, dry, and WAXED prior to application.
 
MAINTENANCE
Important: For vehicle (and many external applications) remove the sign weekly and wipe dry both the vehicle surface and the back of the sign. This keeps moisture from collecting which can damage a vehicle’s finish. To wash the back of the sign, use warm water and a mild nonabrasive detergent. Remove sign after a snowfall or rain, wipe dry and reapply. Also, remove signs before pressure washing, especially in winter as most car washes use de-icing chemicals that could damage the sign face. To clean printed graphics, use a mild, non-abrasive soap with a soft cloth or sponge. Avoid using alcohol-based cleansers or soaps containing grit or abrasives. Automated vehicle washing systems that use rotary cleaning brushes should also be avoided.
 
VEHICLE APPLICATION
Let one edge of the sign contact the vehicle in the desired position. Then let the magnetic force do the work as it positions the sign in place from starting edge to opposite edge. If the sign is out of position, peel it off and repeat. Make sure the sign is smooth against the vehicle with no trapped air underneath. In winter, for conformability purposes, the temperature of the sign should be a minimum of 50°F, but the temperature of the vehicle surface matters little.