Gerber 220 Easy Apply, manufactured by 3M
High performance 2-mil gloss vinyl which features an improved, non-visible, pressure-activated adhesive to simplify application of graphics on flat, corrugated and riveted surfaces. Pigmented adhesive provides maximum opacity. Six- to seven-year exterior life.
Suggested Devices: |
Vinyl Cutting , Thermal Transfer |
Available Colors: |
White |
Available Widths: |
15" Punched |
Available Lengths: |
10 yards, 50 yards |
220 High Performance
High performance 2 mil cast vinyl specifically developed for Gerber for optimal Gerber EDGE-printing, and for vinyl cutting, weeding, and application. Clear pressure-sensitive adhesive allows production of attractive two-way markings. Excellent durability with five to eight-year exterior life.
Suggested Devices: |
Vinyl Cutting , Thermal Transfer |
Available Colors: |
More than 100 Colors Available. See Color Chart |
Available Widths: |
15"/30" Punched, 24" Unpunched, 48" Unpunched |
Available Lengths: |
10 yards, 50 yards |
Introducing 17 New Colors in 15" and 30" widths
Light Grey |
Imperial Red |
Lime Green |
Stone Grey
|
Plum |
Khaki Green |
Mid Grey |
Boat Blue |
Champagne Metallic |
Dove Grey
|
Persian Blue |
Steampunk Red Metallic |
Light Lemon Yellow |
Light Blue |
Petroleum Blue Metallic |
Red Orange
|
Soft Blue |
|
225 High Performance
High performance 2-mil cast vinyl film on a transparent synthetic liner. Expressly formulated for Gerber. Transparent, synthetic liner is moisture-resistant and offers superior registration for multi-color plotter applications and on Gerber thermal transfer printed graphics. Clear pressure-sensitive adhesive allows for production of attractive two-way markings. Excellent durability with five- to eight-year exterior life.
Suggested Devices: |
Vinyl Cutting , Thermal Transfer |
Available Colors: |
More than 20 Colors Available. See Color Chart |
Available Widths: |
15"/30" Punched, 24" Unpunched, 48" Unpunched |
Available Lengths: |
10 yards, 50 yards |
3MTM ControltacTM Film with ComplyTM Adhesive 250Cv2
(discontinued) - Replaced with 180 mC Controltac
2-mil, repositionable vinyl graphic film with a grey-pigmented, pressure-activated adhesive. The design of this film allows air to easily escape through micro- channels under the film’s surface without leaving any noticeable channel marks on the film surface itself. The result is a smooth, glossy graphic film that is faster and easier to apply than conventional films.
Ideal for large graphics over corrugated and riveted surfaces such as tractor trailers, buses, and other fleet graphic applications. 250Cv2 Controltac Film with Comply Adhesive can be used on a wide variety of substrates including ABS resins, aluminum, chrome, glass, fiberglass reinforced plastics, painted surfaces and flat or simple curved surfaces, with and without rivets. This film is not recommended for use on stainless steel, non-3M films, or substrates that do not have a clean, smooth surface or have poor paint-to-substrate adhesion. It is also not intended for applications where petrochemical contact may occur. If petrochemical exposure is anticipated, refer to the Product Bulletin.
Suggested Devices: |
Thermal Transfer, Vinyl Cutting |
Available Colors: |
White |
Available Widths: |
15" Punched |
Available Lengths: |
10 yards |
Gerber ImageCast
Cast 2 mil vinyl film with a clear adhesive system suitable for all types of graphic displays. This material is similar to Clear Enamel Receptive without the enamel receptive coating. Five year unprinted exterior life.
Suggested Devices: |
Thermal Transfer, Vinyl Cutting |
Available Colors: |
Clear material with clear adhesive |
Available Widths: |
15" Punched |
Available Lengths: |
10 yards, 50 yards
|
Not all widths and/or lengths may be available in all colors.